610 USB Keyer/Audio Interface

The 610 is designed to enhance Omni VII remote transceiver operation by allowing your existing CW paddle, microphone and/or headset to be used with the transceiver when in remote mode.

More Information

715 RF Speech Processor for Ten-Tec rigs

Model 715 RF Speech Processor is a high performance true RF-type speech processor designed to operate with most modern HF Amateur Radio transceivers. Order 715-T4 for model 715 supplied with output cable for 4 pin Ten-Tec rigs like Jupiter, Omni-VI, Paragon. Order 715-T8 for model 715 supplied with output cable for 8 pin Ten-Tec rigs, Orion II and Omni-VII. The 715-T8 is also “plug and play” for 8 pin Yaesu transceivers.

More Information

715 RF Speech Processor for use with Icom rigs

Model 715 RF Speech Processor is a high performance true RF-type speech processor designed to operate with most modern HF Amateur Radio transceivers. Order 715-I for 8 pin Icom transceivers. Note that the INPUT jacks on the 715 are wired 8 pin Ten-Tec/Yaesu and 1/8” mono and are not wired for direct input of 8 pin Icom microphones. An adapter, model 720, is available for direct connection of Icom microphones to model 715. Also order model 720 under Cables / Adapters if needed.

Some Icom transceivers use an RJ-45 crimp style microphone connector. Ten-Tec does not offer adapters at this time to convert crimp style microphones to the 715.

More Information

715 RF Speech Processor for use with Kenwood

Model 715 RF Speech Processor is a high performance true RF-type speech processor designed to operate with most modern HF Amateur Radio transceivers. Order 715-K for model 715 with output cable for 8 pin Kenwood and Elecraft transceivers. Note that the INPUT jacks on the 715 are wired 8 pin Ten-Tec/Yaesu and 1/8” mono and are not wired for direct input of 8 pin Kenwood microphones. Adapters for the input of the 715 for use with Kenwood microphones are now available. Also order model 721 under Cables / Adapters if needed. Use 721 adapter for Elecraft Transceivers excluding Elecraft hand mic.

Some Kenwood transceivers use an RJ-45 crimp style microphone connector. Ten-Tec does not offer adapters at this time to convert crimp style microphones to the 715.

More Information

PS2 keyboard

PS2 keyboard for CW transmit use on Jupiter transceiver

Remote encoder/keypad

The 302R remote/encoder keypad allows armchair operation of the JUPITER, RX-350D, OMNI-VII, ORION, or ORION II. Black color is cosmetic match for current Ten-Tec HF transceivers. Direct frequency entry from keypad and control of some transceiver functions from three function buttons located above the tuning knob.

455 kHz I-F 300 Hz BW Collins filter

For Omni-VII (588 and 588AT)

455 kHz I-F 500 Hz BW Collins filter

For Omni-VII (588 and 588AT)

6.3 MHz I-F 2.1 kHz bandwidth filter

2.1 kHz filter, 6.3 MHz I-F for the Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II transceivers. Drop-in replacement for model 288 1.8 kHz filter originally specified for these transceivers. This filter is manufactured by International Radio, part #758.

6.3 MHz I-F 250 Hz bandwidth filter

250 Hz CW filter, 6.3 MHz I-F for the Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II transceivers. Drop-in replacement for model 285 originally specified for these transceivers. This filter is manufactured by International Radio, part #751.

6.3 MHz I-F 400 Hz bandwidth filter

400 Hz CW filter, 6.3 MHz I-F for the Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II transceivers. Drop-in replacement for model 285 originally specified for these transceivers. This filter is manufactured by International Radio, part #750.

Orion 400 Hz CW filter

Drop in replacement model for #217 and #2017 as used in the 9 MHz I-F for the original Orion, NAR filters in Omni-V and Omni-VI series and early Omni’s. International Radio filter #759, 9 MHz I-F, 400 Hz bandwidth.

Orion II 1.8 kHz SSB filter

Orion II 300 Hz CW filter

Orion II 600 Hz CW filter

Orion, Omni-VI 1.8 kHz SSB filter

1.8 kHz bandwidth 9 MHz I-F SSB filter. Used as a roofing filter in the original Orion 565 transceiver. Also used as NAR position bandwidth filter for the Omni-V, Omni-VI, Omni-VI Plus.

Orion, Omni-VI 250 Hz CW filter

INRAD #760 250 Hz bandwidth 9 MHz I-F CW filter. Used as a roofing filter in the original Orion 565 transceiver. Also used as NAR position bandwidth filter for the Omni-V, Omni-VI, Omni-VI Plus.

702 Hand Microphone

702 Hand Microphone
Omni-directional, dynamic element, 500 ohm impedance, wired with an 8 pin connector for the Omni-VII and Orion II HF transceivers. Coiled connection cable. Also usable with 8 pin equipped Yaesu transceivers.

703 Hand Microphone

703 Hand Microphone
Omni-directional, dynamic element, 500 ohm impedance, wired with a 4 pin connector for the Jupiter and older Ten-Tec HF transceivers. Coiled connection cable.

707 Regal desk microphone

The best sounding microphone Ten-Tec has offered yet for Amateur Radio, and possibly the best sounding one available from anyone today!

Order 707-T4 for Regal with 4 pin Ten-Tec connection cable.
Order 707-T8 for Regal with 8 pin Ten-Tec/Yaesu connection cable.
Order 707-RJ45 for Regal with RJ-45 modular Yaesu adapter ($25.95 additional).

More information

707 Regal desk microphone

The best sounding microphone Ten-Tec has offered yet for Amateur Radio, and possibly the best sounding one available from anyone today!

Order 707-I for Regal with 8 pin Icom connection cable.
Order 707-K for Regal with 8 pin Kenwood cable.

More information

716 Table stand for 707 Regal desk microphone

Die-cast metal table stand for the Regal desk microphone. Threaded 6” tube for easy installation of the microphone.

8-Pin deluxe desk microphone

Model 708A deluxe base microphone. TEN-TEC model 708A is an omni-directional dynamic microphones designed for use as a communications station microphone for Amateur Radio and other transmitting applications. The unit consists of a metal die-cast base (plastic bottom cover) with 3 position PTT switch with momentary TX, OFF, and LOCK positions, flexible metal gooseneck, dynamic microphone element and ball-type element housing. The element has tailored frequency response from 30 Hz to 12 kHz designed for excellent transmit audio in SSB, AM, and FM modes.

Order a 710A 8-Pin Male to 4-Pin Female Ten-Tec Adaptor under Cables/Adapters for use with Jupiter Transceiver.

More Information

8-Pin straight microphone

Model 709A is an omni-directional dynamic microphones designed for use as a communications station microphone for Amateur Radio and other transmitting applications. The unit consists of a die-cast zinc shell with molded sliding PTT on/off switch, dynamic microphone element and detachable multi-wire connection cable. The element has tailored frequency response from 30 Hz to 12 kHz designed for excellent transmit audio in SSB, AM, and FM modes.

Order a 710A 8-Pin Male to 4-Pin Female Ten-Tec Adaptor under Cables/Adapters for use with Jupiter Transceiver.

More Information

Desk stand for model 709/A

More Information

2 pin power cable

2 pin power cable as used for Orion, Orion II, Jupiter, Pegasus, Omni-VII, Delta II, Argonaut II, Argonaut V, Scout transceivers. 5 feet length, 14 AWG stranded copper with 2 pin AMP Mate-N-Lok connector on one end.

4 pin power cable

4 pin power cable as used for Omni-V, Omni-VI, Omni-VI Plus, Paragon, Paragon II, Corsair, Corsair II, Argosy, Argosy II, all original Omni series and most Triton IV transceivers. 5 feet length, 14 AWG wire with 4 pin AMP Mate-N-Lok connector on one end of the cable.

5 pin DIN to RCA phono plug adapter cable

46176 5 pin DIN to RCA phono plug adapter cable. Used for interfacing the ACC DIN connector for PTT, audio in and audio out on the rear panel of the Omni-VII, Orion, Orion II, Jupiter and Argonaut V. Makes connecting accessory devices like a PC sound card to the rig easier than soldering your own DIN connector.

710 4-Pin Male to 8-Pin Female Ten-Tec Adaptor

Model 710 4-pin male to 8-pin female Ten-Tec adapter. This adapter is used for plugging in a microphone equipped with a 4 pin Ten-Tec connector (like the 705 and 706 desk mics) into an 8 pin transceiver or accessory device (like the Orion II and Omni-VII transceivers, and the 715 speech processor).

710A 8-Pin Male to 4-Pin Female Ten-Tec Adaptor

Model 710A 8-pin male to 4-pin female Ten-Tec adapter. This adapter is used for plugging in a microphone equipped with a 8 pin Ten-Tec connector into a Ten-Tec 4 pin equipped transceiver or accessory device.

712 - USB soundcard digital mode adapter cable

The model 712 adapter cable (3ft in length) is a soundcard USB device that allows direct connection of the AUX I/O, ACC 1, or AUX 1 jacks on the Omni VII, Orion/Orion II, Argonaut V and some Jupiter HF transceivers to an open USB port for digital mode use.

Sold out. Estimated shipping to begin within 4-6 weeks.

720 Icom to Ten-Tec 8 pin adapter

Allows use of an 8 pin microphone wired for Icom to be plugged into a jack on equipment that accepts 8 pin Ten-Tec/Yaesu wired microphones. For use with model 715 RF Speech Processor or 8 pin Ten-Tec and Yaesu transceivers to allow connection of an Icom 8 pin microphone without re-wiring the Icom microphone connector.

721 Kenwood to Ten-Tec 8 pin adapter

Allows use of an 8 pin microphone wired for Kenwood to be plugged into a jack on equipment that accepts 8 pin Ten-Tec/Yaesu wired microphones. For use with model 715 RF Speech Processor or 8 pin Ten-Tec and Yaesu transceivers to allow connection of an Kenwood 8 pin microphone without re-wiring the Icom microphone connector.

Extra accessory cables for model 707 and Kenwood/Icom rigs

Extra accessory cables for 707 Regal desk microphone and Icom or Kenwood 8 pin rigs. 707I = 4 pin XLR to 8 pin Icom mic connector. 707K = 4 pin XLR to 8 pin Kenwood mic connector. Do not add cables when ordering model 707 unless you need a second output cable, as one is supplied at no charge with 707 purchase.

Extra accessory cables for model 707 and Ten-Tec/Yaesu rigs

Extra accessory cables for 707 Regal desk microphone and Ten-Tec or Yaesu rigs. 707T4 = 4 pin XLR to 4 pin Ten-Tec mic connector as used on original Orion, Jupiter, Omni-VI, Paragon, etc. 707T8 = 4 pin XLR to 8 pin Ten-Tec mic connector as used on Omni-VII and Orion II and all 8 pin Yaesu transceivers. Do not add cables when ordering model 707 unless you need a second output cable, as one is supplied at no charge with 707 purchase. R3415 is an 8 pin to Yaesu RJ45 adapter; RJ45 Yaesu rigs need BOTH 707T8 and R3415.

Extra accessory cables for model 715 and Ten-Tec/Yaesu rigs

Extra accessory cables for model 715 and Ten-Tec or Yaesu rigs. 715T4 = 1/4” stereo output connector to 4 pin Ten-Tec mic connector as used on Jupiter, Omni-VI, Paragon, etc. 715T8 = 1/4” stereo output connector to 8 pin Ten-Tec mic connector as used on Omni-VII and Orion II and all 8 pin Yaesu transceivers. Do not add this cable when ordering model 715 unless you need a second output cable, as one is supplied at no charge with 715 purchase.

Extra accessory cables for model 715 for Kenwood/Icom rigs

Extra accessory cables for model 715 and Kenwood or Icom rigs. 715K = 1/4” stereo output connector to 8 pin Kenwood mic connector as used on Kenwood and Elecraft transceivers. 715I = 1/4” stereo output connector to 8 pin Icom mic connector as used on Icom transceivers. Do not add this cable when ordering model 715 unless you need a second output cable, as one is supplied at no charge with 715 purchase.

USB to Serial Converter

Converts a USB port into a 9-pin male RS-232 serial port. The USB Serial Adapter is designed to make serial port expansion quick and simple.

Works with all Ten-Tec products with a RS-232 serial port.

941 Switching Power Supply

NEW FROM TEN-TEC! Model 941 switching power supply for Ten-Tec HF transceivers. Replacement for the now-discontinued model 963. 115/230 VAC input, 25 amps continuous duty at 13.8 VDC output. New slimline cabinet style allows the power supply to be either horizontally or vertically mounted. Temperature-actuated top exhaust cooling fan. Screw down terminals on rear for attachment of transceiver DC power cable. Size: HWD 2“x7“x9.5”.(does not include rear panel terminals). Weight, 4 pounds.

Model 940 Switching Power Supply / Speaker Console

Model 940 speaker console with internal switching power supply provides up to 25 amps current at 13.8 Vdc for powering HF transceivers and other Amateur Radio devices from an input of 115/230 VAC, 50/60 Hz. Internal high-quality 4 ohm 5 watt speaker is suitable for every possible communication need, from clean CW to well rounded AM receive audio.

More Information

Black External Speaker

The model 307B external communications speaker is designed for use with Ten-Tec radio receivers and transceivers. The 307B is a black cabinet as used for the Orion, Orion II, and Argonaut V HF transceivers, Omni-VII and the RX-350D receiver. The cabinet and speaker are suitable for every possible communcation need, from clean CW operation to well-rounded AM receive audio. The speaker response is 100 to 18000 Hz, 4 ohms impedance, 5 watts power. Speaker measures 4 inches diameter. Supplied with connection cable.

More Information

Model 940 Switching Power Supply / Speaker Console

Model 940 speaker console with internal switching power supply provides up to 25 amps current at 13.8 Vdc for powering HF transceivers and other Amateur Radio devices from an input of 115/230 VAC, 50/60 Hz. Internal high-quality 4 ohm 5 watt speaker is suitable for every possible communication need, from clean CW to well rounded AM receive audio.

More Information

1054 Oak Accessory Cabinet

Oak wood cabinet for the model 1054, which includes a grilled speaker inside the top of the case. Very nice construction on the oak cabinet gives the 1054 a more finished appearance than using it without a case or with an aluminum enclosure.

Omni-VII Rack mount hardware

Model RM-588 19” rack mounting hardware for the 588 Omni-VII transceiver. Used for mounting Omni-VII into a 3U opening standard 19” rack. Mounts to the sides of the transceiver case. All necessary hardware included.

RX-340 Oak Rack Cabinet

Enjoy the rich warm beauty of our new solid oak cabinet designed exclusively to match the RX-340 receiver. Built from 3/4 inch red oak and finished with a hand rubbed urethane satin finish to sustain the beauty and patina of this hand crafted cabinet for years to come.

Click Here to see a Larger Picture

RX-340 Oak Speaker

Hear the difference a quality external speaker will make to your short wave listening experience. Designed to match the unique RX-340 enclosure, you will love the sound of this new shielded driver. Solid 3/4 inch red oak sealed box is finished with a hand rubbed urethane satin finish.

Specifications: Power Handling: 40 watts RMS/70 watts max Impedance: 4 ohms Frequency Response: 100-10,000 Hz Dimensions: 8 3/8 H x 8 1/2 W x 11 1/4 D Terminals: Gold plate binding post. Can also be used with dual banana plugs

Cooling fan assembly

Model 310 cooling fan assembly is an external accessory cooling fan for HF transceivers. Hole-free attachment to transceiver rear heat sink via 4 allen screws.

Jupiter Auto Tuner Kit

The internal automatic antenna tuner can be added to any Jupiter that does not have the autotuner already installed as a user-installable kit. The kit includes a completed circuit board, all necessary cables, and illustrated instructions. Download the instruction manual.

Jupiter Blue Display Upgrade Kit

Includes:

• New style Jupiter blue/grey LCD screen
• MP538K – Jupiter Firmware Upgrade Kit
• Installation instructions with pictures.

Blue/grey screens and/or new firmware chip can be installed in any JUPITER transceiver.

Jupiter Firmware Upgrade Kit

Includes:

• Torx T10
• Programmed EPROM
• Instruction Manual

If your are ordering the Jupiter Blue Display Upgrade Kit you DO NOT need to order this kit, as it is already included with the Jupiter Blue Display Upgrade Kit.

Model 1213 rig-to-soundcard isolation and hookup kit

The model 1213 kit allows the rear panel AUX I/O jack on the Orion and Orion II transceivers, the rear panel ACC 1 jack on the Omni VII and Jupiter transceivers, or the front panel ACCESSORY jack on the Pegasus to be directly connected to a typical PC sound card for digital mode operation.

More Information

Omni-VII Auto Tuner Kit

The internal automatic antenna tuner can be added to any Omni-VII that does not have the autotuner already installed as a user-installable kit. The kit includes a completed circuit board, all necessary cables, and illustrated instructions. The AT588K is a no soldering required installation. Download the instruction manual.

Orion or Orion II Auto Tuner Kit

The internal automatic antenna tuner can be added to any Orion or Orion II that does not have the autotuner already installed as a user-installable kit. The kit includes a completed circuit board, all necessary cables, and illustrated instructions. The AT566K is a no soldering required installation. Download the instruction manual.

TEN-TEC The First 40 Years

TEN-TEC The First 40 Years. Author N.L. Williams, NR4RR, takes you through the first 40 years of the history of TEN-TEC. From the founding of the company in 1968 to the 2008 release of the Omni-VII, Williams’ book is a 132 page illustrated description of all that happened behind the scenes to make TEN-TEC what they are today.

Acro-Bat Antenna Hanger

Ten-Tec model 3003 Acro-Bat antenna hanger. The Acro-Bat is constructed from UV resistant, high-stability Trirex polycarbonate plastic to endure years of outdoor use. This virtually unbreakable plastic is the same as used by electric companies for covering outdoor electric power meters. Hit it with a hammer – it won’t break. All hardware included with the Acro-Bat is stainless steel for rust inhibition.

Acro-Bat can be used to suspend either a ladder line-fed or small gauge RG-58 or RG8X coax-fed wire antenna. It will also accommodate ladder line itself to be used as antenna wire if desired. Pegs internal to the Acro-Bat will hold the ladder line securely in place. Internal screw connections allow solid clamping of the wire antenna to the coax or ladder line feedline itself – no soldering of ladder line or coax feedline to a wire antenna is needed. (Ladder line feed to ladder line used for antenna wire may require this).

More Information

$9.95 each – or order a discount 4 pack at $32.95.

Coffee Cup

Replacement rubber trim rings

Model 315 replacement rubber trim ring for Ten-Tec HF transceivers and amplifiers. The new trim ring features a softer, better feel than the existing ‘car tire’ used around the circumference of Ten-Tec main tuning knobs since the 1980’s. They (black version) are now being supplied as new equipment on Ten-Tec HF transceivers. Can be used on the Omni-V, Omni-VI, Omni-VII, Orion, Orion II, Paragon, Paragon II, Jupiter transceivers, the Centaur, Centurion and Titan I/II/III amplifiers, and the 301 and 302 series external tuning knobs. Sold as single units, for rigs or amps with two large tuning knobs, order quantity of 2. Available in black, charcoal grey, light blue, dark blue, orange, red, and glow-in-the-dark.

Replacement rubber trim rings

Model 315 replacement rubber trim ring for Ten-Tec HF transceivers and amplifiers. The new trim ring features a softer, better feel than the existing ‘car tire’ used around the circumference of Ten-Tec main tuning knobs since the 1980’s. They (black version) are now being supplied as new equipment on Ten-Tec HF transceivers. Can be used on the Omni-V, Omni-VI, Omni-VII, Orion, Orion II, Paragon, Paragon II, Jupiter transceivers, the Centaur, Centurion and Titan I/II/III amplifiers, and the 301 and 302 series external tuning knobs. Available in black, charcoal grey, light blue, dark blue, orange and red. Sold as single units, for rigs or amps with two large tuning knobs, order quantity of 2.

Replacement rubber trim rings

Model 315 replacement rubber trim ring for Ten-Tec HF transceivers and amplifiers. The new trim ring features a softer, better feel than the existing ‘car tire’ used around the circumference of Ten-Tec main tuning knobs since the 1980’s. They (black version) are now being supplied as new equipment on Ten-Tec HF transceivers. Can be used on the Omni-V, Omni-VI, Omni-VII, Orion, Orion II, Paragon, Paragon II, Jupiter transceivers, the Centaur, Centurion and Titan I/II/III amplifiers, and the 301 and 302 series external tuning knobs. Available in black, charcoal grey, light blue, dark blue, orange and red. Sold as single units, for rigs or amps with two large tuning knobs, order quantity of 2.

Hat

Ten-Tec baseball cap, light grey, embroidered two color black and red TT logo, MADE IN USA

Ten-Tec Polo Shirts

“Corsair Grey” with embroidered Ten-Tec logo with red dot. 60% pre-shrunk cotton, 40% polyester. The same shirt the Ten-Tec crew wears to hamfests nationwide. Available in M, L, XL, and XXL.

Ten-Tec Polo Shirts

“Corsair Grey” with embroidered Ten-Tec logo with red dot. 60% pre-shrunk cotton, 40% polyester. The same shirt the Ten-Tec crew wears to hamfests nationwide. Available in M, L, XL, and XXL.